This week's best deals
Every week you can find the best discounts here.
ALCON Zinc Spray
ALCON ZINC spray provides long-term protection against corrosion of metal components. Ideal for components that cannot be galvanized using the hot dip process. It can also be used to repair the surface of galvanized components that have been damaged or repaired prior to welding or other mechanical operations.
| Product Code | Type of packaging | Quantity/carton |
| M-9009 | 400 ml. | 24 |
Suitable application:
Ports and docks, marine, agricultural and other industrial equipment:
Steel door and window frames, fences, gates, garage doors, trailer and caravan chassis, couplings, car body interior panels, structural steel and guardrails, welds, drains and boilers, storage tanks, piping and fittings, etc.
- Shipping today (for weekday orders before 12:00, next day delivery between 09:00 and 18:00)
- Safe packaging, so that liquids do not spill.
- Possibility of direct collection from a DICOM store
- Cash on delivery and review option
Description
- 92% zinc-rich dry film coating – provides cathodic protection for ferrous metals.
- Self-healing mechanism – scratches are resealed by the formation of zinc oxide and carbonates.
- Unique combination of flexibility and hardness – high resistance to peeling, flaking and abrasion.
- Exceptional water resistance – strong polymer, zinc-rich film.
- High-performance coating or primer – contains pure zinc, synthetic resin and additives.
- Non-toxic formula – free of lead and chromates.
- Excellent repair of galvanized surfaces – adheres well to metal surfaces.
Apply to a clean, degreased and dry surface for best results.
Remove residual rust and scale with a wire brush or other abrasive method.
Phosphoric acid-based rust removers that leave an electrically insulating film should not be used as this will interfere with the galvanic protective action.
Clean the area to be treated with a residue-free cleaner and make sure the solvent has completely evaporated before proceeding.
Invert the bottle and shake vigorously for 2 minutes after the ball of the stirrer starts to rattle. Shake frequently during use.
Hold upright and spray from a distance of approximately 15-30 cm.
Apply in light, even layers: For best results, apply 2 light layers at 15-20 minute intervals, instead of 1 thick layer.
Additional coats can be applied at 15-20 minute intervals.
Clean the nozzle after use – turn the can upside down and spray for 3-5 seconds until only the propellant comes out.
Touch dry in 15 minutes at 20°C – Full cure in approximately 24 hours at 20°C.
Appearance: Medium gray dry film coating
Dry to the touch: 15 minutes
Full curing: Approximately 24 hours
Applied film: Micronized zinc, resin-bound
Resin type: Epoxy esters
Solids (film applied): 92% w/w zinc
Solvent: Hydrocarbon
Propellant: DME (dimethyl ether)
Thickness of applied film (1 layer): 0.1mm
Aerosol coverage (0.1 mm): 2.0 m2
Brand
ALCON
Related products
Reviews
There are no reviews yet.