This week's best deals
Every week you can find the best discounts here.
ALCON Silicone Antrasil Neutral RTV black
Application:
– For all corrosion gaps and surfaces to be sealed,
– For cars, trucks, buses, military vehicles, ships, machinery, heating systems, industrial furnaces and chimneys,
– For sealing sensitive surfaces exposed to high temperatures or temperature changes and on surfaces where sealing is required but rubber, cork, clinkerite seals cannot be applied,
– Used in all engine gasket areas, differential covers, carburettor and pump covers, thermostats, gears and gearboxes, transmissions and surfaces exposed to vibration and heat.
| Product Code | Color | Type of packaging | Quantity/carton |
| M-3320 |  black |
90 gr. | 12 |
This product has been added to 4 people'scarts.
- Shipping today (for weekday orders before 12:00, next day delivery between 09:00 and 18:00)
- Safe packaging, so that liquids do not spill.
- Possibility of direct collection from a DICOM store
- Cash on delivery and review option
Description
Silicone sealant based on neutral oxime.
Impermeable even when used on dirty and greasy surfaces and elastic at temperatures up to 300 °C.
- New generation silicone based on neutral oxime.
- After hardening, it does not emit an odor.
- Resistant to shrinkage and cracking caused by exposure to thermal cycles.
- After hardening it is suitable from -40 °C to +300 °C.
- Improved resistance especially to greasy and dirty surfaces.
- After curing, it is resistant to oil, antifreeze, petrol, diesel and sea water.
- It can be dismantled.
- Strong adhesion, coverage, constant elasticity, extra sealing.
- Pure silicone, does not contain any organic filler.
Surface preparation for application:
Silicone contact surfaces must be clean and dry and free from oil, dust, rust and loose parts.
If there is pre-applied silicone on the surface, it will be removed mechanically.
Placing masking tape around the joints not only prevents the joints from smearing, but also ensures a more even application.
Masking tape should be removed immediately after application.
Method of application:
Place the seal on the surface, wait 5-10 minutes, then assemble the parts.
If the surfaces are small, the parts can be assembled immediately.
Technical information:
Hardening : One-component oxime
Elongation at break : 22
Density : 1.05 gr/cm3
Elastic recovery : 450 %
Time to glue : 10 minutes
Work temperature :-60° C to +300° C
Application surface temperature : +5° C to +40° C
– Do not throw full/empty packages into fire. Protect from sunlight and store at a temperature not higher than +50°C.
– Keep out of reach of children.
– Store the container in a well-ventilated place.
– Keep away from sources of ignition, do not smoke.
– Avoid contact with eyes and skin.
– In case of contact with eyes, rinse immediately with plenty of water and seek medical attention.
– Wear suitable protective clothing, gloves and safety glasses/face.
– In case of accident or unwellness, seek medical help immediately (show the label if possible).
– If swallowed, seek medical attention immediately and show this container or the label.
– Do not pour down the drain. Dispose of waste and its containers in accordance with local regulations for the collection of hazardous or special waste.
Допълнителна информация
| Weight | 0,090 kg |
|---|
Brand
ALCON
Related products
Reviews
There are no reviews yet.